Cellu-Stack Lenticular Filter Housing
Lenticular Filter Housing
Gusmer Enterprises offers a complete line of Cellu-Stack lenticular filter housing. Cellu-Stack housings are designed as a cost-effective system for high capacity liquid filtration applications. The versatile sanitary housing line accommodates either 12" or 16" diameter Cellu-Stack filter cartridges. The effective filtration surface area ranges from 17.7 ft2 - 160.0 ft2. Customers can choose 1, 2, 3, or 4-cartridge versions of housings. The housings can be modified with the use of Cellu-Stack adapters to accept fewer cartridges for partial batch runs or other applications requiring fewer cartridges. ASME code housings are also available if required.
Product Details
Videos
Educational Webinars
Gallery
Downloads
Product Details
Application Notes
- Place a quick acting check valve at the housing outlet to avoid integrity breaches that can be caused by back pressure
- Double check that all cartridge gaskets are in place and in good condition to ensure optimal sealing
- If filter life is not fully exhausted by a single filtration, DO NOT remove used filters from the housing for storage between uses. Instead, used filters can be stored IN the housing by following these steps:
- Shut Down: After completion of the filtration cycle, sanitize the filters with the same method used to prepare the filters (i.e. steam or hot water flush)
- Storage: Drain the housing, apply 2 psi gas pressure (i.e. CO2, nitrogen) while the housing is still warm (to avoid a vacuum upon cooling) and close all ports
- Restart: When restarting for another filtration cycle, repeat the sanitization procedure just as you would for normal filter preparation
Addition housing options available:
- Select Line of Filter Housings
Videos
Educational Webinars
Gallery
Downloads